Bulldozer Seat in Maryland - Our group offers a wide selection of various replacement accessories and parts for all models of excavators, loaders, and bulldozers. Our expert Maryland group of parts experts are waiting to help you locate the components you desire.
Forklifts fueled by propane are common in warehouse environments. These forklifts have a propane mount situated at the rear of the driver. These tanks need to be replaced every so often because they have limited lifespans. Operators of forklifts should use care when handling propane tanks. Compressed gases are very dangerous, specially because the gas is flammable. Always use care when removing and replacing propane tank to prevent being injured.
1 To change a propane tank, first stop the forklift while leaving the engine running, and turn off the valve on the tank. Let the forklift run until the engine dies. This process burns off the gas inside the transfer hose which connects the tank and the engine. Before taking the next steps, wear the proper safety equipment, like for instance insulated gloves made of either neoprene or leather. It is really essential for you to protect your skin from contact with the compressed gas, that is very cold.
2 The hose of the tank has to be disconnected, followed by removing the tank from its holding straps. When you put in a new tank, tighten the nut to reconnect the holding straps and to reattach the hose at the valve of the tank.
3 Leaks could be checked just by applying soapy water to the valve and slightly opening it. If there is a leak, it will cause bubbles to foam from around the valve. If this occurs, inspect the connection hose at the nut and the valve area. Re-tighten the connecting nut if you detect any leaks around the valve area, and after that do the leak checking process again. Persistent leaks mean that both the nut and connecting hose would need to be replaced. Nevertheless, if replacing the nut and hose still does not stop the leak, the tank will have to be replaced.
4 Lastly, open the valve all the way to allow the gas to fill the connecting hose. Afterward you could start the forklift and resume working.
Linden Comansa offers its customers the LC 1600 series, ever since 2011. This series of tower cranes is made up of models 16 LC 185, 16 LC 260 and 16 LC 220. These units are available in different kinds of maximum load. The design of the LC 1600 series allows Comansa to keep their fundamental premises, such as easiness of assembly and transport and modularity.
The series offers a load capacity between 8 and 12 tons, placing between the 5 to 8 ton capacity of the LC1100 and the twelve to 48 ton LC2100 model. In addition, the LC1600 family brings together the advantages of both series which shares various factors.
Linden Comansa's Flat-Top modular system was designed for the LC 2100, and is presently in all the tower cranes made by the company. This series incorporates lots of innovations in the particular machine.
The LC 2100 series has 4 Flat-Top crane models: the 21 LC 550, 21 LC 400 and the 21 LC 290. The latest addition to the series is the 21 LC 750. The 21 LC 750 crane is the biggest in the series. It is equipped with eighty meters of jib length and 7 tons of jib-end load. This tower crane provides a maximum load of 48 tons.
The LC3000 series by Comansa is formed by 2 models: the 30 LC 1400 and the 30 LC 1100. These two models are also in 3 different versions with various load capacities. The ranges of load capacities are thirty two, 48 and sixty four tons or 70,550; one hundred five thousand eight hundred twenty and one hundred forty one thousand ninety pounds. The biggest Flat-Top tower cranes have mainly been designed for heavy industry, mining and construction applications and public works.
The Linden Comansa company has produced large capacity cranes for numerous years. Ever since designing this series, the overall production and delivery timeframes are much shorter now. The business has maintained really competitive pricing for their equipment.
